Paxton Automotive Automobile Parts 4809655 User Manual download pdf (Page 6)

P/N: 4809655

16AUG07 v1.0 96-03MusGT(4809655v1.0)

Before beginning this installation, please read through this entire instruction booklet and the Street

Supercharger System Owner's Manual which includes the Automotive Limited Warranties Program and the

Warranty Registration form.

Paxton supercharger systems are performance improving devices. In most cases, increases in torque of 30-

35% and horsepower of 35-45% can be expected with the boost levels specified by Paxton Automotive. This

product is intended for use on healthy, well maintained engines. Installation on a worn-out or damaged engine

is not recommended and may result in failure of the engine as well as the supercharger. Paxton Automotive is

not responsible for engine damage.

Installation on new vehicles will not harm or adversely affect the break-in period so long as factory break-in

procedures are followed.

For best performance and continued durability, please take note of the following key points:

1. Use only premium grade fuel 91 octane or higher (R+M/2).

2. The engine must have stock compression ratio.

3. If the engine has been modified in any way, check with Paxton prior to using this product.

4. Always listen for any sign of detonation (pinging) and discontinue hard use (no boost) until the problem

is resolved.

5. Perform an oil and filter change upon completion of this installation and prior to test driving your vehicle.

Thereafter, always use a high grade SF rated engine oil or a high quality synthetic, and change the oil

and filter every 3,000 miles or less. Never attempt to extend the oil change interval beyond 3,000

miles, regardless of oil manufacturer's claims as potential damage to the supercharger may

result.

6. Before beginning installation, replace all spark plugs that are older than 1 year or 10,000 miles with origi-

nal heat range plugs as specified by the manufacturer and reset timing to factory specifications (follow

the procedures indicated within the factory repair manual and/or as indicated on the factory underhood

emissions tag). Do not use platinum spark plugs unless they are original equipment. Change spark

plugs at least every 15,000 miles and spark plug wires at least every 50,000 miles.

TOOL & SUPPLY REQUIREMENTS:

• Factory Repair Manual

• 3/8" Socket and Drive Set: SAE & Metric

• 1/2" Socket and Drive Set: SAE & Metric

• 3/8"NPT Tap and Handle

• Adjustable Wrench

• Open End Wrenches: 3/8", 7/16", 1/2", 9/16"

• Center Punch and a 5/8" Tapered Punch

• Ford Springlock 3/8" Fuel Fitting Disconnect Tool

• 5 Quarts SH/CF Rated Quality Engine Oil

• Oil Filter and Wrench

• Flat #2 Screwdriver

• Phillips #2 Screwdriver

• Heavy Grease

• Silicone Sealer

• Drill Motor

• 1/8", 3/16", 27/64" Drill Bits

• 1/2" Tube Bender

• 3/16" Allen Wrench

• Wire Strippers and Crimpers

• Utility Knife

If your vehicle has in excess of 10,000 miles since its last spark plug change, then you will also need:

• Spark Plug Socket

• NEW Spark Plugs

1996-2003

FORD 4.6L SOHC MUSTANG

Installation Instructions

50 State Smog Legal, as per CARB EO #D-195-20

Congratulations on selecting the best performing and best backed

automotive supercharger available today!

S U P E R C H A R G E R S

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Comments to this Manuals

No comments

Paxton Automotive Automobile Parts 4809655 User Manual Page 6

Comments to this Manuals

Related products and manuals for Toys & accessories Paxton Automotive Automobile Parts 4809655